Sostanze in database
Scheda d'esempio
Accesso al database
Ultima azienda iscritta

Safety assessment of the process sicht‐pack Hagner, based on Starlinger deCON technology, used to recycle post‐consumer PET into food contact materials

Undefined

Published on: Wed, 14 Oct 2020

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process sicht‐pack Hagner (EU register number RECYC194), which uses the Starlinger deCON technology. The input material is hot washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post‐consumer PET containers, e.g. bottles, including no more than 5% PET from non‐food consumer applications. The flakes are preheated before being submitted to solid‐state polycondensation (SSP) in a continuous reactor at high temperature under vacuum and gas flow. Having examined the challenge test provided, the Panel concluded that the preheating (step 2) and the decontamination in the continuous SSP reactor (step 3) are critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of these critical steps are temperature, pressure, residence time and gas flow rate. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migration of 0.1 μg/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process is not considered to be of safety concern, when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long‐term storage at room temperature, with or without hotfill. The final articles made of this recycled PET are not intended to be used in microwave and conventional ovens and such uses are not covered by this evaluation.

© European Food Safety Authority, 2015

Safety assessment of the process sicht‐pack Hagner, based on Starlinger deCON technology, used to recycle post‐consumer PET into food contact materials


Ultimi Tweets

06/06/2016 - 11:11
Nuovo componente inserito: Simmondsia Chinensis (Jojoba) Seed Oil https://t.co/mGvGLRQ05k
29/05/2016 - 10:04
Nuovo componente inserito: Linum Usitatissimum seed oil Error
27/05/2016 - 16:38
Nuovo componente inserito: Soybean oil https://t.co/9prxB7xyiu

NOAEL-crew

Coordinatore progetto

Inserimento ingredienti cosmetici

Revisione contenuti

Amministrazione del sito

Adesioni e contatti

Per informazioni tecniche sul progetto andare alla sezione FAQ o contattare Roberto Narducci:
 
infoATnoaelproject.it o robymagnoATgmail.com
 
Per informazioni riguardo i costi e le modalità di adesione contattare Federica Cambiganu:
 
federica.cambiganuATpin.unifi.it
 +390574602511
PIN s.c.r.l. - Piazza Giovanni Ciardi 25, 59100 - Prato