Sostanze in database
Scheda d'esempio
Accesso al database
Ultima azienda iscritta

Safety assessment of the process Resinas del Ecuador, based on the Starlinger iV+ technology, used to recycle post‐consumer PET into food contact materials

Undefined

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Resinas del Ecuador (EU register number RECYC230), which uses the Starlinger iV+ technology. The input is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes mainly originating from collected post‐consumer PET containers, with no more than 5% PET from non‐food consumer applications. The flakes are dried and crystallised in a first reactor, then extruded into pellets. These pellets are crystallised, preheated and treated in a solid‐state polycondensation (SSP) reactor. Having examined the challenge test provided, the Panel concluded that the drying and crystallisation (step 2), extrusion and crystallisation (step 3) and SSP (step 4) are critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of these critical steps are temperature, air flow and residence time for the drying and crystallisation step, and temperature, pressure and residence time for the extrusion and crystallisation step as well as the SSP step. It was demonstrated that this recycling process is able to ensure that the level of migration of potential unknown contaminants into food is below the conservatively modelled migration of 0.1 μg/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process is not of safety concern when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long‐term storage at room temperature, with or without hotfill. The final articles made of this recycled PET are not intended to be used in microwave and conventional ovens and such uses are not covered by this evaluation.

Ultimi Tweets

06/06/2016 - 11:11
Nuovo componente inserito: Simmondsia Chinensis (Jojoba) Seed Oil https://t.co/mGvGLRQ05k
29/05/2016 - 10:04
Nuovo componente inserito: Linum Usitatissimum seed oil Error
27/05/2016 - 16:38
Nuovo componente inserito: Soybean oil https://t.co/9prxB7xyiu

NOAEL-crew

Coordinatore progetto

Inserimento ingredienti cosmetici

Revisione contenuti

Amministrazione del sito

Adesioni e contatti

Per informazioni tecniche sul progetto andare alla sezione FAQ o contattare Roberto Narducci:
 
infoATnoaelproject.it o robymagnoATgmail.com
 
Per informazioni riguardo i costi e le modalità di adesione contattare Federica Cambiganu:
 
federica.cambiganuATpin.unifi.it
 +390574602511
PIN s.c.r.l. - Piazza Giovanni Ciardi 25, 59100 - Prato